logo
Shanghai Jianggong Valve Manufacturing Co., Ltd.
produtos
produtos
Para casa > produtos > Válvula de esfera > ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam

ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam

Detalhes do produto

Lugar de origem: CHINA

Marca: JGPV

Termos de pagamento e envio

Quantidade de ordem mínima: 1set

Detalhes da embalagem: Embalagem de segurança da caixa de madeira compensada

Tempo de entrega: 14 dias

Termos de pagamento: L/C, T/T, Western Union

Habilidade da fonte: 500 set por mês

Obtenha o melhor preço
Destacar:

ISO9001 Copper Ball Valve

,

ISO14001 Copper Ball Valve

,

Manual Copper Ball Valve

Aplicativo::
Em geral
Certificado::
ISO9001, ISO14001
Tipo médio::
Água, vapor e óleo etc.
Conexão::
Rosqueado / flangeado / soldado
Padrão ou não padrão::
Padrão
Flow Way::
De duas maneiras
Atuação::
Manual, elétrico, pneumático, automático
Performance de vedação::
Vedação
Temperatura de trabalho::
Temperatura normal e alta temperatura
Aplicação de pressão::
pressão normal
Garantia de qualidade::
18 meses
Aplicativo::
Em geral
Certificado::
ISO9001, ISO14001
Tipo médio::
Água, vapor e óleo etc.
Conexão::
Rosqueado / flangeado / soldado
Padrão ou não padrão::
Padrão
Flow Way::
De duas maneiras
Atuação::
Manual, elétrico, pneumático, automático
Performance de vedação::
Vedação
Temperatura de trabalho::
Temperatura normal e alta temperatura
Aplicação de pressão::
pressão normal
Garantia de qualidade::
18 meses
ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam
Manual Copper Ball Valve with Inner and Outer Wires
Manual copper ball valve with inner and outer wires
Product Introduction

Two piece internal thread ball valve is a common type of valve, which consists of valve body, valve ball, valve stem, valve seat and other components. Among them, the valve body is composed of two hemispheres connected by threads in the middle. The valve ball is spherical and can rotate inside the valve body to achieve switch control. The valve stem is a component that connects the valve ball and the handle, and controls the opening and closing of the valve ball by rotating the handle. The valve seat is the sealing gasket of the valve ball, which can ensure the sealing performance of the valve.

The characteristics of this valve are simple structure, good sealing, easy operation, and long service life.

Technical Specifications
Parameter Value
Nominal Diameter DN (mm) 15~200
Nominal Pressure PN (MPa) 1.6
Test Pressure (MPa) Strength (water): 2.4
Enclose (Water): 1.76
Main Components Body: WCB/CF8/CF8M
Valve ball: Stainless steel/Carbon steel
Seat: PTFE
Packing: Soft graphite
Shaft: 2Cr13
Handle: Ductile iron
Working temperature ≤150℃
Medium suitable Water, oil, steam
Key Features
  • The fluid resistance is small, and its resistance coefficient is equal to that of a pipe segment of the same length.
  • Simple structure, small size, and light weight.
  • Tight and reliable, plastic is widely used as the sealing surface material for ball valves with good sealing performance, and it has also been widely used in vacuum systems.
  • Easy to operate, quick opening and closing, only need to rotate from fully open to fully closed; Easy to control from a distance.
Product Gallery